The Specification of the Single Focus Solution
Page 1 of 1
The Specification of the Single Focus Solution
CONTROLLER FEATURES
• Single-axis stepper motor control system with encoder interface
• Smooth, precise and fast stepper motor movements
• Supply voltage: 10V to 30V DC, 12V is recommend
• 1 Switch to switch run & calibration mod
• 3 Push Buttons to turn motor left, right, and record position
• Compact design measuring roughly 5 X 2.5 X 1.7 inches
• Mini-USB port for firmware upgrades and PC communication
• 256 microstep resolution
• Professional aviation connectors
• Weight 5.9 oz (0.37lb, 0.17kg)
MOTOR UNIT FEATURES:
• Gear ratio: 4.13
• step angle: 1.8 degree
• Position accuracy: +-5%
• Weight: 0.28kg
• Maximum holding torque of the motor: 36.11 oz.inch
• Maximum holding torque on the bigger gear shaft: 149.25 oz.inch
• Standard 0.8 module driving gear
• Professional aviation connectors
• Weight 11.7 oz (0.73 lb, 0.33kg)
ENCODER UNIT FEATURES:
• Magnetic non-contact quadrature encoder
• 360 cts/rev with 4X decoding
• Precision mounting fixture to guarantee accurate reading
• Closed mounting package to prevent dust
• Professional aviation connectors
• Weight 1.9 oz (0.12 lb, 0.05kg)
• Supported manual follow focus units:
• Single-axis stepper motor control system with encoder interface
• Smooth, precise and fast stepper motor movements
• Supply voltage: 10V to 30V DC, 12V is recommend
• 1 Switch to switch run & calibration mod
• 3 Push Buttons to turn motor left, right, and record position
• Compact design measuring roughly 5 X 2.5 X 1.7 inches
• Mini-USB port for firmware upgrades and PC communication
• 256 microstep resolution
• Professional aviation connectors
• Weight 5.9 oz (0.37lb, 0.17kg)
MOTOR UNIT FEATURES:
• Gear ratio: 4.13
• step angle: 1.8 degree
• Position accuracy: +-5%
• Weight: 0.28kg
• Maximum holding torque of the motor: 36.11 oz.inch
• Maximum holding torque on the bigger gear shaft: 149.25 oz.inch
• Standard 0.8 module driving gear
• Professional aviation connectors
• Weight 11.7 oz (0.73 lb, 0.33kg)
ENCODER UNIT FEATURES:
• Magnetic non-contact quadrature encoder
• 360 cts/rev with 4X decoding
• Precision mounting fixture to guarantee accurate reading
• Closed mounting package to prevent dust
• Professional aviation connectors
• Weight 1.9 oz (0.12 lb, 0.05kg)
• Supported manual follow focus units:
- Fotga DP500 III Follow Focus
• Fotga DP500 IIS Follow Focus
• Fotga DP500 II Follow Focus
• FOTGA DP3000 follow focus
• Fotasy Upgraded DP500 Follow Focus V1
• Tilta FF-T03
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|