The Specification of the Single Focus Solution

View previous topic View next topic Go down

The Specification of the Single Focus Solution

Post by Admin on Fri Apr 21, 2017 8:17 am

CONTROLLER FEATURES
• Single-axis stepper motor control system with encoder interface
• Smooth, precise and fast stepper motor movements
• Supply voltage: 10V to 30V DC, 12V is recommend
• 1 Switch to switch run & calibration mod
• 3 Push Buttons to turn motor left, right, and record position
• Compact design measuring roughly 5 X 2.5 X 1.7 inches
• Mini-USB port for firmware upgrades and PC communication
• 256 microstep resolution
• Professional aviation connectors
• Weight 5.9 oz (0.37lb, 0.17kg)



MOTOR UNIT FEATURES:
• Gear ratio: 4.13
• step angle: 1.8 degree
• Position accuracy: +-5%
• Weight: 0.28kg
• Maximum holding torque of the motor: 36.11 oz.inch
• Maximum holding torque on the bigger gear shaft: 149.25 oz.inch
• Standard 0.8 module driving gear
• Professional aviation connectors
• Weight 11.7 oz (0.73 lb, 0.33kg)



ENCODER UNIT FEATURES:
• Magnetic non-contact quadrature encoder
• 360 cts/rev with 4X decoding
• Precision mounting fixture to guarantee accurate reading
• Closed mounting package to prevent dust
• Professional aviation connectors
• Weight 1.9 oz (0.12 lb, 0.05kg)
• Supported manual follow focus units:
 

  •   Fotga DP500 III Follow Focus
       • Fotga DP500 IIS Follow Focus
       • Fotga DP500 II Follow Focus
       • FOTGA DP3000 follow focus
       • Fotasy Upgraded DP500 Follow Focus V1
       • Tilta FF-T03

Admin
Admin

Posts : 4
Join date : 2017-04-14

View user profile http://rapidotechnology.forumotion.com

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum